Uncoupling Membranes

The Original Uncoupling Membrane

DITRA 25

The original, market-leading uncoupling matting. Also acts as a waterproofing, vapour pressure equalisation and load distribution layer, reducing the build-up needed in a floor assembly.

view datasheet 6.1

Uncoupling and Drainage Membrane for Interior and Small Exterior Areas

DITRA-DRAIN 4

4mm impact-resistant polyethylene uncoupling and passive capillary drainage matting for use in interior installations with large format tile and exterior areas of 10m2 or less.

view datasheet 6.2

Uncoupling and Drainage Membrane for Large Exterior Areas

DITRA-DRAIN 8

10mm impact-resistant polyethylene uncoupling and passive capillary drainage matting for use in exterior installations of more than 10m2. The increased height of the membrane allows for efficient handling of the greater volumes of water that a large exterior installation is subjected to.

view datasheet 6.2

Uncoupling Membrane for Electric Underfloor Heating System

DITRA-HEAT

5.5mm polypropylene uncoupling matting with provision for the installation of heating cables. Forms part of the low-height Schlüter-DITRA-HEAT-E electric underfloor heating system.

view datasheet 6.4

Uncoupling Membrane for Electric Underfloor Heating System (Thermal Break and Sound Reduction)

DITRA-HEAT-DUO

7.5mm electric underfloor heating matting, consisting of a 5.5mm polypropylene uncoupling membrane plus a 2mm fleece layer. Provides a thermal break (for increased warm-up efficiency) and impact sound reduction of up to 13dB. Forms part of the low-height Schlüter-DITRA-HEAT-E-DUO electric underfloor heating system.

view datasheet 6.4

Book a CPD Today!

Booking Form